Garage doors require springs to work. Without a spring to lift the mass of the garage door, it would be impossible to open. There are two kinds of spring used in garage door construction. Torsion springs and extension springs. Torsion springs are located above the top of your garage door when it is closed. Extension springs run along the tracks on either side of your door when it is open.

It will probably be very exhausting or totally not possible to open your garage door if one of your springs is broken. This may be actually inconvenient if you're attempting to open your garage door to get your automobile out. It can be even more trying if you're going someplace vital, like work.

Need help soon? Try This chamberlain garage door opener remote

If you have extension springs and one of them is busted, you can be able to discover a substitute and change it yourself. However torsion springs are another matter. If you have a broken torsion spring you ought to get in contact with a garage door company to complete the repair unless you have been specifically trained on replacing torsion springs.

If you attempt to close your garage door using your opener and the door goes part way down, then stops and goes back up, you most probably have an object blocking your door's travel path. Or possibly not

If you look towards the underside of the tracks on either side of your garage door opening, you will see that a set of "eyes". They are there for your safety in addition to the protection of your property and pets. If the beam is interrupted, your garage door will stop going down and begin going back up. Normally your garage door opener light can even flash.

It is feasible that the stop/reverse lights are not pointing at each other. If that is so, it might be possible to adjust them so that they point within the correct direction.

The main cause for this beam to be interrupted is that there's something blocking it. Try to find and eliminate the item that is blocking the beam and also you're most likely good to go.

If you have looked high and low for the thing blocking your garage door to the point that you have become frustrated, it may be that nothing is blocking it. Occassionally a fleck of dirt, an insect or condensation has gotten on the lenses of your stop/reverse lights. Wipe the lenses with a dry cloth and see if that works.

The root cause could possibly be your garage door opener unit. Although they are remarkably trustworthy, issues can fail with them. The 2 significant replacement items with the opener unit are the gear sprocket and the logic or circuit board.

While a homeowner armed with an adventurous spirit and a certain amount of mechincal ability can replace a logic board and a gear sprocket, perhaps the easiest course of action is to simply phone a garage door professional and have the trouble taken care of.

Look here for futher information Read More Here

Since garage doors don't fail to work very often, most people are caught unaware of what to do to get it fixed. Most people make some attempt to trouble shoot their issue before they give up and phone a garage door business. Hopefully this article has given you some insight into what items you can fix yourself and what items should best be left to a professional.